The specs for Soyo SY-KT400 Dragon Ultra (Platinum Edition) state:IDE Description
Four independent channels for 8 IDE devices (2 for RAID)
Supports up to PIO mode 5 & Ultra DMA 66/100/133
Two PCI bus mastering ATA E-IDE ports
1. Can I use this board without using RAID?
Without RAID, how many actual independent channels would I have?
also
3. If this mobo has onboard sound can I still use my soundblaster card?
IDE Question
IDE Question
These are the instructions that came with my Thermalright SLK-800 cooler:
Assembly:
The assembly gestalltet itself just as simply as with the standard Slk-800. after the foil of the base plate was removed and the processor core with thermal compound moistened, leaves one the 6-Punkt-Halteklammer in the base noses to engage. Subsequently, the radiator box is aligned centrically on the base. By means of slotted bolt turners finally the catch side of the fixing clip down pressed to these on the base engages. A strammer contact pressure develops, whereby a good waermeaufnahme is ensured. Although the additionally existing PU Schaumpads provides for a safe seat on the processor, the PC should very carefully be transported and/or the radiators before transport be developed.
Assembly:
The assembly gestalltet itself just as simply as with the standard Slk-800. after the foil of the base plate was removed and the processor core with thermal compound moistened, leaves one the 6-Punkt-Halteklammer in the base noses to engage. Subsequently, the radiator box is aligned centrically on the base. By means of slotted bolt turners finally the catch side of the fixing clip down pressed to these on the base engages. A strammer contact pressure develops, whereby a good waermeaufnahme is ensured. Although the additionally existing PU Schaumpads provides for a safe seat on the processor, the PC should very carefully be transported and/or the radiators before transport be developed.
-
cyborgbuddy
- Genuine Member
- Posts: 55
- Joined: Tue Jul 09, 2002 5:45 pm
- Location: Ardrossan, Scotland
You will be able to use your board without RAID or the onboard sound if you disable the appropriate options in the BIOS. They're usually under 'Onboard Peripherals' or something similar and normally come 'enabled' by default.
Couldn't advise you in the independent channels though, sorry!
Couldn't advise you in the independent channels though, sorry!
Rig 1
AMD Athlon XP2400+ @ 2100Mhz on Gigabyte GA-7DXR+
Thermaltake Volvano 7+ HSF with Artic Silver 3
512Mb PC2100 RAM with Thermaltake Ramsinks
GeForce4 Ti4400 with Thermaltake GF4 cooler and ramsinks @ 310Mhz x 625 Mhz
Lian Li PC6083A case with Lian Li windowed side panel and bloo cold cathode
Rig 2
AMD Athlon XP2100+ @ 1820Mhz on Abit KD7
Thermaltake Volcano 7+ with Artic Silver 3
256Mb PC2100 RAM
Nvidia MX440 64Mb @ stock with Thermaltake Ramsinks
Lian Li PC60
AMD Athlon XP2400+ @ 2100Mhz on Gigabyte GA-7DXR+
Thermaltake Volvano 7+ HSF with Artic Silver 3
512Mb PC2100 RAM with Thermaltake Ramsinks
GeForce4 Ti4400 with Thermaltake GF4 cooler and ramsinks @ 310Mhz x 625 Mhz
Lian Li PC6083A case with Lian Li windowed side panel and bloo cold cathode
Rig 2
AMD Athlon XP2100+ @ 1820Mhz on Abit KD7
Thermaltake Volcano 7+ with Artic Silver 3
256Mb PC2100 RAM
Nvidia MX440 64Mb @ stock with Thermaltake Ramsinks
Lian Li PC60
-
Shadow250
- Golden Member
- Posts: 1172
- Joined: Fri Jan 04, 2002 9:08 pm
- Location: Walton New York 13856
- Contact:
you can use the board without raid, if you use the ultra drivers the raid part can be used as regular ide controllers. if you turn the sound off in bios you can use a pci card in place of the cmi sound. the options to turn raid/sound on/off are in the Soyo combo menu toward the bottom of the screen.
<a href="http://www.heatware.com/eval.php?id=9490"><font color=red>My Heatware<font/></a> <font color=white><font size="2">
Thanks to you both.
These are the instructions that came with my Thermalright SLK-800 cooler:
Assembly:
The assembly gestalltet itself just as simply as with the standard Slk-800. after the foil of the base plate was removed and the processor core with thermal compound moistened, leaves one the 6-Punkt-Halteklammer in the base noses to engage. Subsequently, the radiator box is aligned centrically on the base. By means of slotted bolt turners finally the catch side of the fixing clip down pressed to these on the base engages. A strammer contact pressure develops, whereby a good waermeaufnahme is ensured. Although the additionally existing PU Schaumpads provides for a safe seat on the processor, the PC should very carefully be transported and/or the radiators before transport be developed.
Assembly:
The assembly gestalltet itself just as simply as with the standard Slk-800. after the foil of the base plate was removed and the processor core with thermal compound moistened, leaves one the 6-Punkt-Halteklammer in the base noses to engage. Subsequently, the radiator box is aligned centrically on the base. By means of slotted bolt turners finally the catch side of the fixing clip down pressed to these on the base engages. A strammer contact pressure develops, whereby a good waermeaufnahme is ensured. Although the additionally existing PU Schaumpads provides for a safe seat on the processor, the PC should very carefully be transported and/or the radiators before transport be developed.