Firstly im new to these boards so hey people
Hi my pc has come along a bit since i done this but its to give you lot an idea on where to start.
Hi i got my new pc pictures there from my gx-20 so a bit small
I got some uv cables now
and im gettin dual 12" uv cathodes and dual 4" cathodes with antec orange uv fan
I still got loadz to do to it tho
[hr]
I got my Stuff through today:
Dual 12" UV Cold Cathode
Dual 4" UV Cold Cathode
Antec Orange UV Fan.
I plan to move the dvd rom up a slot, Put the fan next to my black one so it takes in cold air( My black takes out warm air). And place my 12" cathodes at the top and bottom of my window and tidy up a bit
Sorry for the crappy pics its cuz their from my mobile phone
[hr]
Ok now i got them i can start to mod YAY MY FIRST MOD.
Ok first lets get these wires sorted out cuz look at them
Ok now their sorted out ( NOT ABOVE THATS THE BEFORE) I can take the pc apart to sort out the new Drive placement
I had to take off the front panel to slide the drive out.
Here is the new position
Ok thats now done and the Front pannel put back on (Picture near the end.)
Now i can place the dual 12" cathodes and connect the new Fan
I have tided the cables up and all my fans now run off the spare molex instead of the board. The Antec fan has a auto senser which is connected to the board.
Ok now i have placed the side panel back on
I have taken it back into my room and powerd up to see what it looks like
I noticed because my window is a transparent blue not all the UV light is seen by the eye as shown in the next few photos.
[hr]
This is the fan through the window
Now this is the fan without the window
You can straight away tell the difference.
Now you can see cables through the window UVed up
And this is a bad photo without the windows
Its really cool looking and its all because of these two 12" cathodes
I now have to think of a place where i can place the switche for the cathode and i have to place the 4" ones now.
here is the finished drive replacement
This mod aint that big but its a start as i am new to modding. I eventually hope to be like ouja and the other top modders.
Thanks for your time reading this and please leave yout comments.
With other ideas on what to do. :rock: :rock:
Project:Newbie UV
Project:Newbie UV
[CENTER]My Main Rig:
|AMD XP Barton 3000+ @ 2171.6 mhz|
|DFI LanParty Nforce2 Ultra| AeroCool Glacier Copper HeatSink & Quad LED Fan|
|Kingston 512MB PC3200 CL3|
|Geforce 3 TI500 | Sound Blaster® Audigy™ 2| Creative® Inspire™ 6.1 6700|
|160Gb Maxtor 7200 SATA (8mb Cache)|
|Lite On 16X DVDROM Drive | Lite On 8x DVD±R/RW Drive|
|Orange Rounded UV Cable Set|2 x Bubble Tubes |DFI Lanparty Orange UV reactive Round cables| Antec Orange UV Fan|Dual 12" UV Cold Cathodes|Dual 4" UV Cold Cathodes| [/CENTER]
|AMD XP Barton 3000+ @ 2171.6 mhz|
|DFI LanParty Nforce2 Ultra| AeroCool Glacier Copper HeatSink & Quad LED Fan|
|Kingston 512MB PC3200 CL3|
|Geforce 3 TI500 | Sound Blaster® Audigy™ 2| Creative® Inspire™ 6.1 6700|
|160Gb Maxtor 7200 SATA (8mb Cache)|
|Lite On 16X DVDROM Drive | Lite On 8x DVD±R/RW Drive|
|Orange Rounded UV Cable Set|2 x Bubble Tubes |DFI Lanparty Orange UV reactive Round cables| Antec Orange UV Fan|Dual 12" UV Cold Cathodes|Dual 4" UV Cold Cathodes| [/CENTER]
- TheSovereign
- Posts: 2957
- Joined: Mon Apr 15, 2002 4:03 am
- Location: chicago
- Contact:
Yeah...
....good work, especially using the phone camera. Cold cathodes work out well if you can't see the tubes when looking in the window. I like placing them along the edge of the window, or towards the front - on both sides of the drive cages.
<color=red>Home web site: http://www.bigal-computers.net</color>
<color=blue>Like motorcycles? Check out the WORMS here: http://www.bigal-computers.net/worms.php</color>
Lots of hand-built and modded AMD systems.
<color=blue>Like motorcycles? Check out the WORMS here: http://www.bigal-computers.net/worms.php</color>
Lots of hand-built and modded AMD systems.
-
- Goober Member
- Posts: 1
- Joined: Mon Dec 20, 2004 5:29 pm
- Location: jackson new jersey
- Contact:
Thats cool ?
hey whats up man thats really cool, what you did with your pc, i have that exact same case and im new as well with modding, im basically doing the same thing except im not sure how to do it how did you get those lights in the front of your case where the two beams are exactly infront of the pc, the two sides...