If you have any tweaks or an interesting setup, leave it here.
FYI: There are some new beta drivers out for the Radeons (version 7041) that can be had at http://www.rageunderground.com. I'm using them and they seem stable in addition to getting a bit higher #'s in 3dMark2k.
L8er, Vid_2
Post Radeon Tweaks or Info here.
- FuNPoLiCe001
- Posts: 987
- Joined: Wed Nov 22, 2000 4:57 pm
- Location: T dot O dot
- Contact:
there's new Win2k drivers out
Supposedly gives better 2d and much improved speed.
Dont have 2k installed, so i haven't tried it out yet
There's a discussion going on <a href="http://www.rage3d.com/forum/ubbhtml/For ... 02813.html" open="newwindow">here</a>
And You can download the drivers <a href="http://www.3dchipset.com/beta/ati/503073/win-2k.html" open="newwindow"> here </a>
Supposedly gives better 2d and much improved speed.
Dont have 2k installed, so i haven't tried it out yet
There's a discussion going on <a href="http://www.rage3d.com/forum/ubbhtml/For ... 02813.html" open="newwindow">here</a>
And You can download the drivers <a href="http://www.3dchipset.com/beta/ati/503073/win-2k.html" open="newwindow"> here </a>
Let Cam, take care of your breasts
- Hipnotic_Tranz
- Almighty Member
- Posts: 3750
- Joined: Wed Nov 22, 2000 6:35 am
- Location: Indpls, IN
- Contact:
I'm about to recieve my AIW 32meg Radeon. I was curious if DX8 is really an improvement on this card? Should I even bother installing it? Is there anything else I should know about this card? I should be recieving it around Monday or Tuesday.
[align=center]<img src=http://i54.tinypic.com/j9tydf.gif>
<i>
My get up and go
must have got up and went.
</i>[/align]
<i>
My get up and go
must have got up and went.
</i>[/align]
dx 8
DX 8 doesn't relly make much difference at this point, but it doesn't hurt anything either.
I have it installed in both W2K & Win98SE with my 64meg VIVO & it works fine.
I have it installed in both W2K & Win98SE with my 64meg VIVO & it works fine.
<img src=http://home.rochester.rr.com/morton/sig2.gif>
<A HREF=http://heatware.elitehardware.com/view.shtml?action=list&option=johnm>My Heatware references </A>
<A HREF=http://heatware.elitehardware.com/view.shtml?action=list&option=johnm>My Heatware references </A>
- Hipnotic_Tranz
- Almighty Member
- Posts: 3750
- Joined: Wed Nov 22, 2000 6:35 am
- Location: Indpls, IN
- Contact:
I just installed the "Special Purpose" drivers and I recieved a GREAT DEAL of improvement. Near 10-12 fps in q3. I suggest ya try 'em out if you haven't already.
[edit]
Just noticed something. I usually have my start bar on "auto-hide" but when you play any 3d accelerated games in resolutions above the windows desktop resolution, you will see the start bar when playing. You can get rid of this by making sure "auto-hide" is <b>NOT</b> checked. Wierd and kinda annoying fix, but atleast it fixes it.
[Edited by Hipnotic_Tranz on 12-03-2000 at 02:27 PM]
[edit]
Just noticed something. I usually have my start bar on "auto-hide" but when you play any 3d accelerated games in resolutions above the windows desktop resolution, you will see the start bar when playing. You can get rid of this by making sure "auto-hide" is <b>NOT</b> checked. Wierd and kinda annoying fix, but atleast it fixes it.
[Edited by Hipnotic_Tranz on 12-03-2000 at 02:27 PM]
[align=center]<img src=http://i54.tinypic.com/j9tydf.gif>
<i>
My get up and go
must have got up and went.
</i>[/align]
<i>
My get up and go
must have got up and went.
</i>[/align]
Use these Reg entries. Email for more info.
REGEDIT4
[HKEY_LOCAL_MACHINE\SOFTWARE\ATI Technologies\Driver\0000\atidxhal]
"EnableWaitUntilIdxTriList2"="1"
"ZFogEnable"="1"
"DisableHierarchicalZ"="0"
"DisableHyperZ"="0"
"AntiAlias"="0"
"ZFormats"="15"
"ExportCompressedTex"="1"
"TCL"="1"
"TCLEnableVertexBlend2Optimize"="1"
"TCLEnableVertexBlendUseProjMat"="1"
"TCLEnableBackFaceCulling"="1"
"RasterGuardbandEnable"="1"
"AntiAliasRatio"="512"
"FastZClearEnabled"="1"
"TableFogEnable"="1"
"PixelShaderVersion"="11"
"VertexShaderVersion"="11"
"SysMemBlts"="1"
"VMSEnabled"="1"
"ZMaskEnable"="1"
"ColorFill"="1"
"BackBufTiling"="1"
"LVB"="1"
"WFogEnable"="1"
"Vsync"="0"
"EnablePlaneMaskWorkaround"="1"
"DitherAlpha"="1"
"EnableUntransformedInLocalMem"="1"
"VolTxEnable"="1"
"VbDdHeapEnabled"="1"
REGEDIT4
[HKEY_LOCAL_MACHINE\SOFTWARE\ATI Technologies\Driver\0000\atidxhal]
"EnableWaitUntilIdxTriList2"="1"
"ZFogEnable"="1"
"DisableHierarchicalZ"="0"
"DisableHyperZ"="0"
"AntiAlias"="0"
"ZFormats"="15"
"ExportCompressedTex"="1"
"TCL"="1"
"TCLEnableVertexBlend2Optimize"="1"
"TCLEnableVertexBlendUseProjMat"="1"
"TCLEnableBackFaceCulling"="1"
"RasterGuardbandEnable"="1"
"AntiAliasRatio"="512"
"FastZClearEnabled"="1"
"TableFogEnable"="1"
"PixelShaderVersion"="11"
"VertexShaderVersion"="11"
"SysMemBlts"="1"
"VMSEnabled"="1"
"ZMaskEnable"="1"
"ColorFill"="1"
"BackBufTiling"="1"
"LVB"="1"
"WFogEnable"="1"
"Vsync"="0"
"EnablePlaneMaskWorkaround"="1"
"DitherAlpha"="1"
"EnableUntransformedInLocalMem"="1"
"VolTxEnable"="1"
"VbDdHeapEnabled"="1"