yup.......went ahead and overclocked it
went from being a 700mhz to being a 945mhz.
there is a lack of fsb settings on the board I am using, so the fsb is at 135 x7 mulitplyer. The system wouldnt stay stable and sometimes wouldnt boot at a 138fsb
so i gained an extra 245mhz on this machine.....think its good as far as OCing the older processors go?
Overclocked my p3
-
Absolut Talent
- Almighty Member
- Posts: 2868
- Joined: Mon Jan 07, 2002 12:30 pm
Overclocked my p3
Gone for good. But never say never
I got a p3 500 from rage that did in the mid 900's 
but yea, nice OC.
Greg
but yea, nice OC.Greg
<a href="http://www.pcabusers.org" target="_new"> <img src="http://www.pcabusers.org/images1/banner.jpg" border="0"></a>
<a target=NEW href="http://setiathome.ssl.berkeley.edu/stats/team/team_87793.html">JOIN the PCA Seti Team!</a>
<a target=NEW href="http://setiathome.ssl.berkeley.edu/stats/team/team_87793.html">JOIN the PCA Seti Team!</a>
-
Absolut Talent
- Almighty Member
- Posts: 2868
- Joined: Mon Jan 07, 2002 12:30 pm
always trying to upstage me, huh greg? 
and pred, yeah from what I read, the model I had was one of the better overclocking ones. It had a sB0 stepping on it. But I think the ones made in Costa Rica are the ones able to get closer and pass the ghz mark. Since this one was made in malay.....i think it will get close
but I dont think i will beat the ghz mark unless I used some better cooling and possibly a different mobo
and pred, yeah from what I read, the model I had was one of the better overclocking ones. It had a sB0 stepping on it. But I think the ones made in Costa Rica are the ones able to get closer and pass the ghz mark. Since this one was made in malay.....i think it will get close
but I dont think i will beat the ghz mark unless I used some better cooling and possibly a different mobo
Gone for good. But never say never
I have the 700 slot 1 with a pair of GW fans that ran its whole life at 133ish with an extra half volt. Great cpu, like the 366 celeron and 450 P2.
Just replaced it with an amd 2400 but still working perfectly and great match with the MSI BX Master mb & the good crucial 7E memory.
The agp was overclocked with the 133fsb but all my vid cards handled it fine. GF 2 & 3, Voodoo 5500 & radeon 8500.
Just replaced it with an amd 2400 but still working perfectly and great match with the MSI BX Master mb & the good crucial 7E memory.
The agp was overclocked with the 133fsb but all my vid cards handled it fine. GF 2 & 3, Voodoo 5500 & radeon 8500.
I Am Canadian
DFI Lanparty Ultra-D/AMD Opteron 165(9 x 270) /2x512mb Crucial Ballistix 3200/Nvidia 7900GT/LianLi V1000 + Antec Neo/WinXPpro/ Western Digital JDKS 250gb x 2/LG 16X Multidrive/Dell 1907FP
Asus A8N-E/AMD 64 3500+(11 x 255)/2x512 Corsair XMS 3200/Antec Sonata/ATI X800XL/WinXP/Maxtor 10 300gb x 2/LG 16X Multidrive/Dell FPW2005
Heat 219-0-0
DFI Lanparty Ultra-D/AMD Opteron 165(9 x 270) /2x512mb Crucial Ballistix 3200/Nvidia 7900GT/LianLi V1000 + Antec Neo/WinXPpro/ Western Digital JDKS 250gb x 2/LG 16X Multidrive/Dell 1907FP
Asus A8N-E/AMD 64 3500+(11 x 255)/2x512 Corsair XMS 3200/Antec Sonata/ATI X800XL/WinXP/Maxtor 10 300gb x 2/LG 16X Multidrive/Dell FPW2005
Heat 219-0-0
I have a p3 933 coppermine
I've managed to get it up to 1267 with rock solid stability
I can get it to boot up at 1309 but it's pretty unstable
I'm still trying to get the system to run at 1333 which is my goal, but I'm not sure id a 400mhz oc is possible
I think alot of the oc potential of the p3 relies on the mobo you have, my tusl2-c is currently running a fsb of 181
I've managed to get it up to 1267 with rock solid stability
I can get it to boot up at 1309 but it's pretty unstable
I'm still trying to get the system to run at 1333 which is my goal, but I'm not sure id a 400mhz oc is possible
I think alot of the oc potential of the p3 relies on the mobo you have, my tusl2-c is currently running a fsb of 181