PCA Forums

Posted: **Wed Nov 22, 2000 11:43 pm**

lookin into one of these, how hard can they be pushed on a be6-2? i have good pc 100 ram!

Posted: **Wed Nov 22, 2000 11:55 pm**

Luck of the draw I imagine, its a sl35d if I remember correctly, I had one and it did about 630, and I hope its really good pc100 cause even at 600 mhz it's a 133 fsb.

Posted: **Thu Nov 23, 2000 2:08 am**

dang, i forgot about that, hopefully this seimens will get the job done!

Posted: **Thu Nov 23, 2000 7:38 am**

Reg, mine did 600 on a Soyo +III mobo. But couldn't get it stable any higher than that with air cooling.

sethpa

Posted: **Thu Nov 23, 2000 1:39 pm**

With a 600 core and an Alpha provided you have ram capable of 133mhz then 600 should be no problem. Unless you have some VERY good pc100 I wouldn't even hope for anything above 600 with that ram.

Frost.

Posted: **Thu Nov 23, 2000 4:06 pm**

ok, im in the works to get some 133

Posted: **Sat Nov 25, 2000 2:12 am**

we got one upto 150mhz bus... but talk about a LOT of work modifying an alpha AND a vantec to fit on a single chip (similar in concept to the old double stacked celeron coolers). Poor chip only lasted a week running like that

PCA Forums

how hard can you OC a slot 1 P3 450 with the 600 core?

450