Page 1 of 1

OCing 1900+

Posted: Mon Sep 23, 2002 9:15 pm
by matt719
Hey, I just got an AX7 with an adjustable speed fan and I decided to OC it a bit to see what the limits are. I just put the fsb to 140 cause i even did that with my old fan and knew it could handle it with the vcore at the default 1.75. I wanna put it up to 1.73Ghz, what do you think the vcore should be at? My cpu idles at 40C right now, and at 1.6GHz it was idleing at 39-40C. Not much of a temperature change there.

EDIT: Temps. are actually the same. After not doing much more than using IE and AIM it went down to 39C again. It's a consistant measurement (Doesn't go from 39 to 40 and form 40 to 39, etc). The case temp is hovering at 28C right now.

EDIT: Over night the temps went down to 34C @ 1.68GHz. Case temp is 23C.

Posted: Sat Sep 28, 2002 1:04 am
by Mark099
Those temps are fine. Personally, I would say to try keep the voltage below 1.80V if possible.

Posted: Sat Oct 05, 2002 3:41 pm
by Nuts4GTS
Which mobo are you running?