INTEL CPU - DDRII probs...
Posted: Fri Dec 14, 2007 12:46 pm
hello all,
My problem is that i want to install 4x 1gb DDRII memory in my system. after checking out the HP site for my PC i found the following probs in the INFO pages:
MOBO specs
http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname
Motherboard Specifications, P5LP-LE (lithium)
Socket: 775
Supports Pentium D (Smithfield) up to 3.2 GHz and Pentium4
(Prescott) up to 580 and 670
system bus: 533 MHz, 800 MHz, 1066 MHz
chipset: Northbridge: Intel 945P + Southbridge: Intel I/O Controller Hub 7
Memory: Four 240-pin DDR2 DIMM sockets
(Supports PC2 4200 (533 MHz) and PC2 5300 (667 MHz) DDR2 DIMMs)
product specs
http://h10025.www1.hp.com/ewfrf/wc/genericDocument?lc=en&cc=us&
Hardware
Base processor
Pentium4 660 (P) HT 3.6 GHz: 800 MHz front side bus, Socket 775
Memory
Component Attributes
Memory Installed 1 GB (2 x 512)
Maximum allowed 4 GB* (4 x 1 GB) requires the replacement of the installed 512 MB DIMMs
*Actual available memory may be less
Speed supported PC2-4200 MB/sec
Type 240 pin, DDR2 SDRAM
DIMM slots Four
Open DIMM slots Two
: can you see the prob??
in the product help it shows only pc4200 but on my MOBO spec it shows pc5300!!!
...and, what exactly is my system bus?? 533,800 or 1066
bloody hell HP are usless!! talk about confuse people!!
please could anyone help me with this prob!!
cheers
UK1nation
My problem is that i want to install 4x 1gb DDRII memory in my system. after checking out the HP site for my PC i found the following probs in the INFO pages:
MOBO specs
http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname
Motherboard Specifications, P5LP-LE (lithium)
Socket: 775
Supports Pentium D (Smithfield) up to 3.2 GHz and Pentium4
(Prescott) up to 580 and 670
system bus: 533 MHz, 800 MHz, 1066 MHz
chipset: Northbridge: Intel 945P + Southbridge: Intel I/O Controller Hub 7
Memory: Four 240-pin DDR2 DIMM sockets
(Supports PC2 4200 (533 MHz) and PC2 5300 (667 MHz) DDR2 DIMMs)
product specs
http://h10025.www1.hp.com/ewfrf/wc/genericDocument?lc=en&cc=us&
Hardware
Base processor
Pentium4 660 (P) HT 3.6 GHz: 800 MHz front side bus, Socket 775
Memory
Component Attributes
Memory Installed 1 GB (2 x 512)
Maximum allowed 4 GB* (4 x 1 GB) requires the replacement of the installed 512 MB DIMMs
*Actual available memory may be less
Speed supported PC2-4200 MB/sec
Type 240 pin, DDR2 SDRAM
DIMM slots Four
Open DIMM slots Two
: can you see the prob??
in the product help it shows only pc4200 but on my MOBO spec it shows pc5300!!!
...and, what exactly is my system bus?? 533,800 or 1066
bloody hell HP are usless!! talk about confuse people!!
please could anyone help me with this prob!!
cheers
UK1nation