Page 1 of 1

Posted: Thu Feb 24, 2000 8:35 pm
by dadx2mj
First off let me say Welcome to the best place on the net hope you enjoy it as much as I have. Every chip is different and so the only way to know how far yours will go is to try. I thnik the 733's were all EB chips meaning they run on a FSB of 133 so that does not give you a lot of head room. I would guess 850 or if you are lucky maybe 900. Just work your way up slowly and keep and I on temps. Good Luck

Posted: Tue Feb 20, 2001 11:58 pm
by ckaaron
New to this forum, it was good reading so I registered.

How high can I OC my new retail PIII Coppermine 733?

The system is new, and I really don't feel like finding out the hard way.

I also keep seeing copper shims talked about, and I haven't run across any - they help? I'm running an Alpha on the CPU with a Sunon fan - cooler master case.... silencer400 p/s


btw. reading the posts, this sounds like a bright site with some serious tech going on -peace.

Posted: Sat Feb 24, 2001 5:15 pm
by Speck102
I have my EB running at 825MHz at 1.7v with a GORB. I can't go higher caus my mobo won't go past 150MHz fsb. With an alpha u should get better results.