I/o VoltAgE LimiT

Sedul · Post by **Sedul** » Wed May 23, 2001 10:47 pm

how high should i get ma i/o voltage to be.. like.. 3.30 is default.. how high is the limit.... when do io raise this after i riased all the core voltage?

i have my core at 1.825

my comp is 900 mhz. rite now from 750.. gonan burn it in a bit. then try for more.

but when do i raise the i/o voltage? when i'm overclcokgin'
i'm afraid i'm gonna kill something raising the i/o voltage sinc ei'ts like has to do with input ouput sstuff.. or something

thanxk

Kazer · Post by **Kazer** » Wed May 23, 2001 11:37 pm

*example
My computer wasn't stable at 133 fsb because my ram didn't seem to like 133fsb and cas2, upped the juice to 3.50 and it's stable. Also some people have to put it at 3.50 to get there GeForce2 videocards stable.

I'm running with 3.50 i/o voltage

So far none of my components are dead yet so that is a good sign i guess

hammer01 · Post by **hammer01** » Thu May 24, 2001 4:56 am

Yeppers, Kazer is right on some mobos, I even believe that 3.50 is the default, so I would not be scared to run it at that or even a step or two higher (although I have never needed to run above 3.50).

Sedul · Post by **Sedul** » Thu May 24, 2001 7:17 am

cool thanxs!. i need all oc'n experience stories from you guys to make mine a better one

thankxs

hammer01 · Post by **hammer01** » Thu May 24, 2001 7:22 am

Not a prob, that is one of the reasons we are here.

Kazer · Post by **Kazer** » Thu May 24, 2001 7:22 am

Yeah, the default for my KT7a-Raid is 3.40